2016 24 rls. Br tv

[uct]

I got mine directly from starcraft customer service.they are cad drawings. They emailed them to me.

[jcarlilesiu]

That would be helpful for all models. If you let me know where you got it, I will post them up in all the forums for reference.

[rbrent]

Centered over the left side of the side wall window is an 1" x 11.75" x 11.75" piece of plywood. It's number 3 in the drawing. I put mine there yesterday!

image.jpg

Where Did you get this drawing? I'd like to get drawings of all the walls in my 2015 24RLS

[rwisema1]

Hi!

Where can I get the same kind of drawing for the 16RB Launch?

Thanks,
Rob

[uct]

Thanks for the drawing. I am sure others will need it also

[Dadof4]

Centered over the left side of the side wall window is an 1" x 11.75" x 11.75" piece of plywood. It's number 3 in the drawing. I put mine there yesterday!

image.jpg (206.23 KiB) Viewed 2944 times

[uct]

Thanks I would like to put my TV on the side wall. Yours looks good . Does it get in the way when walking around the bed?

[moallen]

Here's a photo of my 2016 24rls installation. There just happened to be a wood stud exactly in the center of the wall where you see the 19" TV mounted. I was able to locate the stud it by pressing in on the wall. You will want to be careful and drill small pilot holes first. It is probably just a 1 1/2" wood stud. I used 1 1/4" x 1/4" lag bolts.

Some might take the TV down for travel, but it seems so secure I haven't worried about taking it down. If there is a factory wood plate for a bedroom TV, it is probably over in the corner. But we wanted the TV centered with our bed.

Bedroom_TV.jpg (95.78 KiB) Viewed 3034 times

[uct]

I have another question. Where exactly is the mounting block for the bedroom TV and what length faster should I use? Thanks