Page 1 of 1
Re: Torx T20 8 point? Need help!
Posted: March 23rd, 2016, 12:30 am
by 001
Try a #2 square bit. That should work.
Re: Torx T20 8 point? Need help!
Posted: August 30th, 2015, 11:34 am
by pawpaw
Update, the #2 square drive bit worked perfectly! Project is completed!
Re: Torx T20 8 point? Need help!
Posted: August 28th, 2015, 10:44 pm
by uct
Try a #2 square drive it should work
Re: Torx T20 8 point? Need help!
Posted: August 28th, 2015, 10:43 pm
by pawpaw
I've found that a #2 square bit fits! I'll get back on the project tomorrow.
Hopefully, problem solved!
Torx T20 8 point? Need help!
Posted: August 28th, 2015, 9:12 pm
by pawpaw
I'm working on a project on my TT and the screws that I need to remove appear to be Torx T20 type but instead of the normal 6 points, these things have 8 points. WEIRD!
I've checked my local sources for a bit or screwdriver and come up empty. I've also looked on the internet and had no luck there either.
Is there another name for this fastener other than Torx? Has anybody found a bit or screwdriver to fit these screws?
I really don't want to drill them out.
Any help would be appreciated.
Thanks
Pawpaw