Page 1 of 1
Re: Upgrading the Original DVD/Radio in our RV
Posted: October 20th, 2019, 2:16 pm
by kuba122
Yeah, I did it. You have to make a bezel because the din is smaller than original. I made video of the process ..... i will try to get to editing soon.
Re: Upgrading the Original DVD/Radio in our RV
Posted: October 19th, 2019, 11:51 pm
by Ferrenburg
Hello there, any updates to your project? I'm curious about doing the same thing in our trailer.
Upgrading the Original DVD/Radio in our RV
Posted: June 22nd, 2019, 3:40 pm
by kuba122
Our Barely used DVD/Receiver system died. I had to totally take it apart to get a CD out of it. In complete reality We "might" have used it for a total of 40 hours. We never even put a DVD in it, usually I played a CD or a usb stick with MP3s on it while I was working.
I am not putting an RV unit back in. I am goung to fit a pioneer double din DVD receiver AVH-601EX in the spot vacated by our old Drive EED-V06.
There is a fairly significant size difference, so, it won't be a simple swap.
This swap out will require a little wood working, bracket fabrication, extra remote ports and cables and an A/B/AB Speaker Selector.
I've been using pioneer Car Stereo systems for 30 years. Every one I ever owned lasted several years longer than the two this one did. In my cars, there is always a CD going. In my work truck it plays at least 2 hours every day driving around town, on average.
I will photo and video document this swap for those that might want to do the same thing in the future, starting today.