Page 1 of 1
Re: Full Motion TV Mount
Posted: April 8th, 2017, 7:09 pm
by ARONEMAXX17
Well I actually got this done with no problem at all. I simple took the four screws holding the microwave in place and removed it completly. Next I cut a piece of 2x4 and screwed from outside to inside just enough to hold in place until I could secure my mount. I'll have to upload pictures next time I'm in the camper.
Re: Full Motion TV Mount
Posted: March 25th, 2017, 8:14 pm
by kuba122
The main thing to be concerned about is finding something fairly substantial to mount it to. Find a Stud and make sure you drive at least two of the mounting screws into it. If you cannot hit a stud, cut a piece of 1/2 to 3/4 plywood or solid pine/oak, etc that can hit a stud at both ends and mount the tv mount to that. Sorry it took so long to get some sort of answer!!
Full Motion TV Mount
Posted: March 18th, 2017, 1:41 am
by ARONEMAXX17
Hey guys just curious. I recently bought a AR-ONE MAXX 19BHS. and with two small children I needed some way to entertain on rainy days or at night. Where is the best place to mount a small TV.
Thanks