Fastway E2 equalizer hitch

A forum to discuss tow vehicles and towing related issues.
Post Reply
lslysaght
Posts: 3
Joined: May 31st, 2016, 4:51 am

Re: Fastway E2 equalizer hitch

Post by lslysaght » May 31st, 2016, 8:08 pm

Thanks!

moallen
Posts: 214
Joined: April 27th, 2015, 8:25 pm
Contact:

Re: Fastway E2 equalizer hitch

Post by moallen » May 31st, 2016, 7:37 pm

Good decision! I would definitely have the dealer set it up and show you how to take it on & off. It's easy after that. The initial adjustments are critical. Get them wrong and the equalizer hitch will do more harm than good.
2016 Starcraft Launch Ultra Lite 24RLS
2016 Dodge Ram 4x4, 5.7L V8, 8 speed auto, 3.21 axle ratio

lslysaght
Posts: 3
Joined: May 31st, 2016, 4:51 am

Re: Fastway E2 equalizer hitch

Post by lslysaght » May 31st, 2016, 6:19 pm

Thanks! I think we're just gonna let the dealer do it. He will do it for $50 so works out better for us.

User avatar
jcarlilesiu
Posts: 342
Joined: January 6th, 2015, 8:23 pm
Location: Manteno, Illinois

Re: Fastway E2 equalizer hitch

Post by jcarlilesiu » May 31st, 2016, 5:41 pm

In most cases the equalizer hitch is just a different receiver connected to the tow vehicle. That part is very simple.

Then you install new connectors (bolt on) for the equalizer bar to the A-frame of the trailer.

With the new receiver in place, you just run the equalizer bar from the attachments on the receiver to the bolted on connections to the A-frame.

It isn't too complicated. Hope this helps.
2014 Starcraft 16RB - Camper | 2015 GMC Yukon Denali XL

lslysaght
Posts: 3
Joined: May 31st, 2016, 4:51 am

Fastway E2 equalizer hitch

Post by lslysaght » May 31st, 2016, 3:28 pm

We are the proud owners of a 2015 AR One Extreme 14RB. I am new to the forum. We need to purchase and install an equalizer hitch and are wondering if it is difficult to do yourself. We are somewhat handy but not sure we could do it. Watched some You Tube videos that made it sound easy. Does anyone have experience with this?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest